CS41H-16, CS41H-16C, CS41-25, CS41-40 type free float steam trap:
flange connection, floating ball type structure, the valve seat
sealing surface material for Cr13 stainless steel, nominal pressure
PN16~PN40, body material for cast iron (CS41H-16), carbon steel
(CS41-25, CS41-40, CS41H-16C) steam trap. For steam heating
equipment, steam pipe network and condensate recovery system, it
can quickly, automatically, continuously to remove condensate,
effectively prevent steam leakage.
Working principle: free floating ball type steam hydrophobic valve
using the principle of buoyancy, the floating ball according to
condensed water quantity, with the change of water level for lift
automatic adjustment of the valve seat hole opening, continuous
discharge of condensed water, when the condensation of water stop
in, float down the bottom, back to the closed position, to stop the
drainage, due to the drainage hole of the valve seat is always
below the condensation of water to form water seal, water, gas
separated from natural to no steam leakage.
Product characteristics: 1 nengtuo saturated condensate, receipt
equipment does not contain water to accumulate, so as to obtain the
highest heating efficiency. When the steam pressure is changed, it
is not affected, and the performance can be stable. The leakage of
small changing all the time with advanced grinding, manufacturing
process, the floating ball of high precision, good sealing
performance. The automatic air discharge performance. The life is
long, the floating ball can do the whole spherical sealing surface,
(a) lever float steam trap:
Lever float steam trap, widely used in industrial steam heating
equipment, a variety of large-scale heat exchanger and dryer,
jacket, etc., in particular, the application of large displacement
of condensate in the workplace.
(two) the characteristics of lever float steam traps:
This large displacement type steam traps, in the entire operating
pressure range without adjustment and replacement of the inner
parts, you can remove a large number of suspected water. The
drainage water cooling degree can reach 0, especially suitable for
the working situation of large water consumption.
Structure characteristics and working principle of lever float
1, the use of rolling and loading valve machinery (New SCCV switch
mode), with excellent sealing and durability.
2, the balance of the dual valve seat design, smaller than the
average size of the drainage valve and large displacement, large
displacement field and more to play the superiority.
3, inside the double metal piece air automatic discharge valve, can
prevent air gas and steam lock.
4, using a unique U type dual metal vent, can greatly shorten the
starting time of equipment.
5, all components are installed on the valve cover, valve without
removing from the piping on, you can repair and maintenance, simple